diabetestalk.net

Medtronic Quick Set Mmt 399

Product Recall: Medtronic Minimed Infusion Sets

Product Recall: Medtronic Minimed Infusion Sets

Medtronic has announced a voluntary recall of their Medtronic MiniMed Infusion Sets. Why? There have been reports of over-delivery of insulin following infusion set changes. These occurrences of over-delivery of insulin can cause hypoglycemia, some cases being extreme and needing medical intervention. Medtronic states: Our investigation has shown this can be caused by fluid blocking the infusion set membrane during the priming/fill-tubing process. A membrane blocked by fluid most likely occurs if insulin, alcohol, or water is spilled on top of the insulin reservoir which then could prevent the infusion set from working properly. Infusion sets currently being shipped by Medtronic contain a new and enhanced membrane material that significantly reduces this risk. What You Can Do You can go to to see if you have recalled infusion sets. You’ll need to enter the REF and LOT numbers, which can be seen in this illustration, highlighted by the red boxes. Enter in the numbers for all of the infusion sets that you have to see if they are affected. Medtronic states not to use any of the infusion sets on the list. More Questions? Follow the process on the website at You can call Medtronic at 1.888.204.7616. You can also report an adverse event to the FDA’s MedWatch Adverse Event Reporting program: Report by telephone: 1.800.FDA.1088 Fax report: 1.800.FDA.0178 Continue reading >>

Medtronic Recalls Insulin Infusion Pumps

Medtronic Recalls Insulin Infusion Pumps

WASHINGTON, July 13 (UPI) -- The U.S. Food and Drug Administration announced the recall of some lots of Quick-set infusion sets produced by Medtronic Inc. for use by diabetes patients. The FDA said the infusion sets are used with the company's MiniMed Paradigm insulin pumps. An infusion set is a thin plastic tube used to deliver insulin from an insulin pump to a diabetes patient, and is typically replaced by the patient every three days, officials said. Medtronic said the recalled infusion sets have reference numbers MMT-396, MMT-397, MMT-398 and MMT-399 and with lot numbers starting with the number "8." Medtronic recently discovered approximately 60,000 of the infusion sets might fail to allow the insulin pump to vent air pressure. That, officials said, could potentially result in the device delivering too much or too little insulin and could lead to serious injury or death. The company said the lot number is marked on both the product box label and on each individual infusion set package. Customers are being asked to return any affected infusion sets to the company, which will provide replacement Quick-set infusion sets at no additional charge. "Lot 8" Quick-set infusion sets were distributed in the United States, and well as in other nations, including the Bahamas, Bermuda, Brazil, Canada, Ecuador, El Salvador, Germany, Kuwait, Mexico, Paraguay, Turkey and the United Kingdom. More information is available at www.medtronicdiabetes.com/lot8. Continue reading >>

Minimed Quick-set Infusion Sets

Minimed Quick-set Infusion Sets

MiniMed Quick-set : Comfort and ease MiniMed Quick-set is a popular MiniMed infusion set, combining great comfort and ease of use. Its soft cannula, hypoallergenic tape and ease of insertion with the Quick-Serter device, even in hard-to-reach areas, makes it a great choice for children and adults of average to large build. It is recommended to order infusion sets direct from the NDSS , if you are eligible. Soft cannula of 6mm or 9mm, available in various tubing lengths. Quick-serter insertion device for one-handed 90 insertion. The Quick-set infusion set provides the convenience of a disconnect at the infusion site and a pre-attached adhesive for a discreet, low profile design. Available in either 6mm or 9 mm soft cannula. Works with Quick-serter to provide optimal insertion. All MiniMed infusion sets tubing and reservoirs are designed with a unique MiniMed connection for a more secure insulin delivery. For a better insulin absorption, and to help avoid insulin degradation and infusion set occlusion, you should change your infusion regularly. It is recommended to change your Quick-set infusion set every 48 to 72 hours. MiniMed Quick-set Infusion Set 9mm Cannula, 80cm Tubing (10/box) MiniMed Quick-set Infusion Set 6mm Cannula, 80cm Tubing (10/box) MiniMed Quick-set Infusion Set 9mm Cannula, 110cm Tubing (10/box) MiniMed Quick-set Infusion Set 9mm Cannula, 60cm Tubing (10/box) MiniMed Quick-set Infusion Set 6mm Cannula, 110cm Tubing (10/box) MiniMed Quick-set Infusion Set 6mm Cannula, 60cm Tubing (10/box) Continue reading >>

Mmt-399 Quick-set Paradigm Infusion Set 10/box

Mmt-399 Quick-set Paradigm Infusion Set 10/box

QUICK-SET PARADIGM INFUSION SET 23/6MM 10/BOX PLEASE NOTE: THIS PRODUCT REQUIRES A DOCTORS PRESCRIPTION. .single_add_to_cart_button{background-color:red !important;} Package Contains: MMT-399 Quick-set 6mm Cannula / 23 Tubing (10/box) Length of cannula: 6 mm Soft Cannula (25 gauge) The Quick-set provides the convenience of a disconnect at the infusion site and a pre-attached adhesive for a discreet, low profile design. The Quick-set offers the option of a 6mm soft cannula for leaner bodies or a 9mm soft cannula for most everyone else that is inserted at a 90-degree angle. The Safe Needle Disposal System of the Quick-set prevent accidental stickings when disposing of the introducer needle in a sharps container. Works with the Quick-serter to provide optimal insertion every time! Mfg #: MMT-399 ASIN B00286H6LU Mfg: MINIMED PLEASE FAX ALL PRESCRIPTIONS TO 866-769-9294, email to: [email protected] , OR drag and drop into the form below. IF WE DO NOT RECEIVE THIS YOUR ORDER WILL BE CANCELLED** Continue reading >>

Minimed Quick-set<sup></sup> Infusion Sets

Minimed Quick-set Infusion Sets

MiniMed Quick-set : Comfort and easeMiniMed Quick-set is a popular MiniMed infusion set, combining great comfort and ease of use. Its soft cannula, hypoallergenic tape and ease of insertion with the Quick-serter device, even in hard-to-reach areas, makes it a great choice for children and adults of average to large build. Soft cannula of 6mm or 9mm, available in various tubing lengths. Available: QuicK-Serter insertion device for one-handed 90 insertion Usage Information: The Quick-set infusion set provides the convenience of a disconnect at the infusion site and a pre-attached adhesive for a discreet, low profile design. Available in either 6mm or 9 mm soft cannula. Works with Quick-serter to provide optimal insertion. All MiniMed infusion sets tubing and reservoirs are designed with a unique MiniMed connection for a more secure insulin delivery. For a better insulin absorption, and to help avoid insulin degradation and infusion set occlusion, you should change your infusion regularly. It is recommended to change your Quick-set infusion set every 48 to 72 hours. Continue reading >>

Infusion Set Recall - Diabetes Self-management

Infusion Set Recall - Diabetes Self-management

Medtronic has voluntarily recalled Quick-set infusion sets that have lot numbers beginning with the number 8. A small percentage of these infusion sets , which are used with MiniMed Paradigm insulin pumps , may not work properly. Approximately 2% of the infusion sets in Lot 8, representing roughly 60,000 sets in total, may not allow the insulin pump to vent properly (venting allows pressure in the insulin pump reservoir to equalize with the pressure of the surrounding air). If the vent does not work properly, too much or too little insulin could be delivered, potentially resulting in dangerously high or low blood glucose levels. The lot number for the infusion sets is located both on the box label and on the individual infusion set packages. Only sets in Lot 8 with the model numbers MMT-396, MMT-397, MMT-398, and MMT-399 are affected. People who have a Quick-set infusion set from the affected lot are advised to stop using the set immediately and to switch to an unaffected infusion set or to an injection regimen. They are additionally urged to contact Medtronic at this Web site or by calling (800) 345-8139. Unused infusion sets can be returned to the company with a prepaid return label to be replaced. For more information about the recall, see Medtronics letter to customers . Disclaimer of Medical Advice: You understand that the blog posts and comments to such blog posts (whether posted by us, our agents or bloggers, or by users) do not constitute medical advice or recommendation of any kind, and you should not rely on any information contained in such posts or comments to replace consultations with your qualified health care professionals to meet your individual needs. The opinions and other information contained in the blog posts and comments do not reflect the opinio Continue reading >>

Medtronic Insulin Infusion Set Litigation

Medtronic Insulin Infusion Set Litigation

Medtronic announced that approximately 60,000 Quick-set infusion sets used with the Medtronic MiniMed Paradigm insulin pumps could be defective and not work properly. MiniMed Insulin Pumps The thin plastic tubes are used with the MiniMed Paradigm Medtronic insulin pump to deliver insulin to diabetes patients. The infusion set is typically replaced every three days. However, thousands of patients may have been sold infusion sets that may not allow the insulin pump to vent air pressure properly, potentially resulting in the device delivering too much or too little insulin. Over or under delivery of insulin from an insulin pump could have serious and catastrophic consequences for diabetes patients. Medtronic announced that approximately 60,000 Quick-set infusion sets used with the Medtronic MiniMed Paradigm insulin pumps could be defective and not work properly. Therefore, they recalled an estimated 3 million of the infusion sets with reference numbers MMT-396, MMT-397, MMT-398 and MMT-399 with lot numbers starting with an “8”. Insulin Overdose Symptoms Diabetes patients who begin to develop any of the following signs or symptoms should seek medical attention immediately as they may be experiencing an insulin overdose: Hypoglycemia One of the most dangerous risks associated with insulin overdose is hypoglycemia, a condition in which a person’s blood sugar (glucose) is too low. Symptoms include: cold sweats, confusion, double vision, convulsions, fatigue and general discomfort. Severe hypoglycemia can result in seizures, coma and death. Continue reading >>

Solara Medical Supplies

Solara Medical Supplies

Flexible Spending Account (FSA) Eligible Products? This product is FSA Approved which means that is typically eligible for purchase using a Flexible Spending Account. FSA coverage can vary from plan to plan, and your individual employer ultimately determines which products and services are eligible for coverage. Please refer to your employer or plan for the exact details of your flexible spending account before using it. The Quick-set provides the convenience of a disconnect at the infusion site and a pre-attached adhesive for a discreet, low profile design. The Quick-set offers the option of a 6mm soft cannula for leaner bodies or a 9mm soft cannula for most everyone else that is inserted at a 90-degree angle. The Safe Needle Disposal System of the Quick-set helps prevent "accidental stickings" when disposing of the introducer needle in a sharps container. The Quick-set works with the Quick-serter to provide optimal insertion every time! Paradigm Infusion Sets are only compatible with the Paradigm Pump. Rx Required: In the US, this product requires a prescription from your doctor before purchase. This item is restricted by federal law to sale by or on the order of a physician. The price listed is the retail price. For orders billed to your insurance, the actual price is based on the contracted rate. Continue reading >>

Class 1 Device Recall Paradigm Quickset Infusion Set

Class 1 Device Recall Paradigm Quickset Infusion Set

Class 1 Device Recall PARADIGM QUICKSET INFUSION SET Class 1 Device Recall PARADIGM QUICKSET INFUSION SET Paradigm Quick-set Infusion Sets, Models MMT-396, MMT-397, MMT-398 and MMT-399. The Paradigm Quick-set infusion sets are intended for use in combination with Paradigm reservoirs (models MMT- 326 or MMT-332) and Paradigm external insulin infusion pumps to deliver insulin (subcutaneously) to patients who require exogenous insulin to maintain glycemic control. Approximately 2% of the infusion sets in the affected lots may not allow the insulin pump to vent properly. Venting is necessary to equalize the pressure in the syringe compartment with the surrounding atmosphere. If the vent does not work properly, this could potentially result in too much or too little insulin being delivered. Medtronic issued an "URGENT MEDICAL DEVICE RECALL" notification letter dated July 6, 2009 to health care professionals, followed by notification letters dated July 7, 2009 to distributors, inactive and active customers. Letters to healthcare professionals and distributors were sent via UPS 2-Day Air with signature confirmation of delivery required. On July 8, 2009 and July 9, 2009, a notification letter, along with replacements sets, were mailed via UPS to active patients or customers (who have ordered since January 2009). The notification letter to patients (inactive customers) who last ordered prior to January 1, 2009 were issued via First Class U.S. Mail. All letters to patients include a preaddressed, postage paid card to confirm that the patient has received the recall notice and to identify whether or not they have unused sets to return. As described in the patient letters, patients have the option to confirm receipt of the notification and to order replacement infusion sets online Continue reading >>

Msd Online | Medtronic Minimed Paradigm Quick-set | Msd

Msd Online | Medtronic Minimed Paradigm Quick-set | Msd

The Medtronic Minimed Paradigm Quick-set infusion conveniently disconnects at the infusion site and offers a pre-attached adhesive for a discreet, low profile design. The Medtronic Minimed Quick-set Infusion Set offers a 9mm soft cannula for mostly everyone and 43 inch tubing. The Safe Needle Disposal System of the Medtronic Minimed Quick-set helps prevent accidental sticking when disposing of the introducer needle in your sharps container. This Medtronic Minimed set works with the Quick-serter to provide optimal insertion every time. Product Literature: Medtronic paradigm MSDS.pdf *Image Disclaimer: Do not order based on the image alone. The image displayed may not represent the specific product you are ordering. The Medtronic Minimed Paradigm Quick-set infusion conveniently disconnects at the infusion site and offers a pre-attached adhesive for a discreet, low profile design. The Medtronic Minimed Quick-set Infusion Set offers a 9mm soft cannula for mostly everyone and 43 inch tubing. The Safe Needle Disposal System of the Medtronic Minimed Quick-set helps prevent accidental sticking when disposing of the introducer needle in your sharps container. This Medtronic Minimed set works with the Quick-serter to provide optimal insertion every time. Product Literature: Medtronic paradigm MSDS.pdf *Image Disclaimer: Do not order based on the image alone. The image displayed may not represent the specific product you are ordering. Continue reading >>

Medtronic Quick Set Infusion Sets | Injury Lawyers In New York

Medtronic Quick Set Infusion Sets | Injury Lawyers In New York

New York Medtronic Paradigm Quick-Set Lawyer Medical Device Liability Attorneys in New York Medtronic Paradigm Recall: Quick-Set Infusion Sets for MiniMed Insulin Pump The Medtronic Quick-Set Infusion sets are tubes used to deliver insulin with the MiniMed Paradigm pumps. The New York medical device lawyers at Rheingold Giuffra Ruffo & Plotkin LLP, help people who have been harmed by or lost loved ones due to the use of the defective Medtronic Quick-Sets. We are equipped to help you pursue monetary compensation for your medical bills, lost wages and other economic damages. At Rheingold Giuffra Ruffo & Plotkin LLP , we have been serving the legal needs of people throughout New York and across the nation for over 30 years. We handle a wide range of complex cases involving drug and medical device liability, including Medtronic Quick-Set lawsuits. The Dangers of Medtronic Paradigm Quick-Set Infusion Sets for MiniMed Insulin Pump Medtronic Inc. has recalled three million disposable infusion sets designed for their MiniMed Paradigm insulin pumps after discovering that some of them could deliver incorrect doses of insulin, potentially leading to injury or death. The Medtronic Paradigm recall involves one lot of Quick-set infusion sets, which are disposable plastic tubes used to infuse a diabetes patient from the Medtronic insulin pump. They are usually replaced after three days. Medtronic issued a press release on July 10 alerting users that approximately 2%, or about 60,000 units, from one lot of its infusion sets have a defect that could give too much insulin to the patient. The affected infusion sets have a lot number starting with "8" marked on the product box label and on each infusion set package, with the reference numbers MMT-396, MMT-397, MMT-398 and MMT-399. The def Continue reading >>

Minimed Quick-set Infusionsset

Minimed Quick-set Infusionsset

MiniMed Quick-set: Confort et simplicitMiniMed Quick-set est un cathter MiniMed trs demand qui associe un grand confort et une simplicit d'utilisation. Sa canule souple, son adhsif hypoallergnique et sa facilit d'insertion grce au dispositif Quick-serter, mme dans des zones difficiles d'accs, en font un choix idal pour les enfants et les adultes de corpulence moyenne forte. Canule souple de 6mm ou 9mm, disponible avec diffrentes longueurs de tubulures. Dispositif d'insertion Quick-serter disponible pour une insertion 90 une main. Informations d'utilisation: Le cathter Quick-set permet une dconnexion aise au site de perfusion et comporte un adhsif prfix pour une conception simple et discrte. Disponible avec une canule souple de 6mm ou 9mm. Systme scuris d'limination de l'aiguille. Fonctionne avec Quick-serter pour permettre une insertion optimale. Compatible avec la pompe insuline Paradigm. Tous les cathters et rservoirs MiniMed sont conus avec une connexion MiniMed unique pour une administration d'insuline plus fiable. Pour une meilleure absorption de l'insuline, et afin d'viter la dgradation de l'insuline et l'occlusion du cathter, il est ncessaire de changer votre cathter rgulirement. Il est recommand de changer votre Quick-set toutes les 48 72 heures. Continue reading >>

Medtronic Diabetes Recalls Infusion Sets

Medtronic Diabetes Recalls Infusion Sets

Medtronic Diabetes is recalling its Quick-set infusion sets that have lot numbers starting with the number 8 and reference numbers MMT-396 through MMT-399. The Lot 8 Quick-set infusion sets, used with MiniMed Paradigm insulin pumps, are being recalled because they were manufactured with an added lubricant that was clogging the vents in approximately 2% of the sets from that lot, preventing the insulin pump from venting properly. This could potentially result in too much or too little insulin being delivered and may lead to serious injury or death. Customers should stop using Lot 8 Quick-set infusion sets right away. Medtronic is providing replacement infusion sets to customers at no additional charge. Limited quantities of Lot 8 infusion sets have been distributed in the Bahamas, Bermuda, Brazil, Canada, Ecuador, El Salvador, Germany, Kuwait, Mexico, Paraguay, Turkey, and the United Kingdom. In Canada, customers who have received the sets from Medtronic Diabetes will be contacted. Canadian customers who have questions or concerns should call Canada's customer service line at 1-800-284-4416 for more information. No other Medtronic infusion sets are affected by this recall. Customers may use any other Paradigm infusion sets they have available and have been trained on (including Quick-sets other than Lot 8, and Silhouette, Sure-T, Sof-set, or Polyfin infusion sets), the company said online. Continue reading >>

Press Release | Newsroom | Medtronic | Medtronic Voluntarily Recalls Specific Lots Of Paradigm Quick-set Infusion Sets In The United States

Press Release | Newsroom | Medtronic | Medtronic Voluntarily Recalls Specific Lots Of Paradigm Quick-set Infusion Sets In The United States

Medtronic Voluntarily Recalls Specific Lots of Paradigm Quick-Set Infusion Sets in the United States Company Is Providing Replacement Infusion Sets to Its Diabetes Customers at No Additional Charge MINNEAPOLIS July 10, 2009 Medtronic, Inc. (NYSE:MDT) said today that it has initiated a recall of specific lots of Quick-set infusion sets that are used with MiniMed Paradigm insulin pumps. An infusion set is a thin plastic tube used to deliver insulin from an insulin pump to a diabetes patient, and is typically replaced by the patient every three days. Affected infusion sets are reference numbers MMT-396, MMT-397, MMT-398 and MMT-399 with lot numbers starting with the number 8. Medtronic recently discovered that approximately two percent of Lot 8 Quick-set infusion sets (which represents approximately 60,000 infusion sets out of an estimated 3 million infusion sets currently with customers) may not work properly. The affected infusion sets may not allow the insulin pump to vent air pressure properly. This could potentially result in the device delivering too much or too little insulin and may lead to serious injury or death. Patients should discontinue using Lot 8 Quick-set infusion sets. The lot number (for example 8XXXXXX) is clearly marked on both the product box label, and on each individual infusion set package. Visit the Medtronic Diabetes website at www.medtronicdiabetes.com/lot8 to view the labels of Lot 8 Quick-set infusion sets. Customers are being asked to return any affected infusion sets to the company. Medtronic is providing customers with replacement Quick-set infusion sets at no additional charge. Lot 8 Quick-set infusion sets were distributed in the United States, and in limited quantities in a small number of countries outside of the United States. The lis Continue reading >>

Medtronic Recalls Infusion Sets

Medtronic Recalls Infusion Sets

Medtronic Inc. has voluntarily recalled certain lots of its Quick-set infusion sets used with MiniMed Paradigm insulin pumps. The company said people who have infusion sets with reference numbers MMT-396, MMT-397, MMT-398, and MMT-399 and lot numbers beginning with 8 should stop using them. The lot number is marked both on the product box label and on each infusion set package, below the reference number. More information about how to determine whether you have an affected infusion set is available at Medtronic's diabetes Web site . An infusion set is a thin plastic tube used to deliver insulin from a pump. The user replaces it about every three days. Medtronic said it had found that about 2 percent of the lot 8 infusion setsabout 60,000 in allmay not work properly because they are blocking the insulin pump from venting air pressure as designed. That could result in the pump delivering too much or too little insulin and put the user's health at risk. Medtronic asked customers to return any affected infusion sets to the company and said they would be replaced free of charge. Customers may call Medtronic's information line at 1-800-345-8139. Problems with this or any other diabetes device or medication may be reported to the Food and Drug Administration's MedWatch Program or by calling 1-800-332-1088. Continue reading >>

More in diabetes